|
I saw that it said for "damp" locations but I wasn't sure what that
meant.
The difference between damp and wet locations is:
Damp locations: fixtures that may be used outside provided that
they will not get rained on directly.
Example: All our ceiling mounts are rated for damp locations and if
being used outside need something such as a porch overhang so water will
not enter the top.
Wet locations: fixtures that may take direct rain, all our "flush"
and "arm" wall mount light fixtures are rated for wet locations.
How much light do I need for a room? (bulbs,
wattage)
Here's a easy to use rule of
thumb...
1. Get the square footage of your room (length x width =)
2. Take the square footage and use the formula in the table below.
This will give you the approximate total wattage
to shoot for.
Example: A 10 x 10 room =
100 square feet
|
Light bulb type |
Formula |
approx. total wattage |
|
Incandescent |
x 2 |
= 200 w |
|
Halogen |
x 1.5 |
= 150 w |
|
Low voltage Halogen |
x 1 |
= 100 w |
|
Fluorescent |
Divided by 2 |
= 50 w |
Please note: A light
bulb's light output or lumens may vary from manufacturer to manufacturer for
a given wattage and more light may
be needed for some tasks and individuals.
How can I save on my electric bill and keep my home well lit at the same
time?
With the way
utilities have doubled in California, many have been switching to compact
fluorescent bulbs. They give you 4 times the light output or lumens per watt as regular
incandescent bulbs, last about 4 times longer and the reduced heat prolongs the
life of the light fixture socket and wiring etc. In
other words you can use a lower wattage bulb to get the same light output.
|